EN
EUR
Get the app

eSIM not working abroad? A step-by-step fix for iPhone and Android

BY VISOMU TEAMPUBLISHED 16 NOVEMBER 20266 MIN READ
Two telecommunication masts in silhouette against an orange evening sky

You land, switch your phone on, and nothing: no bars, “No Service”, or full bars but pages that won’t load. When you find your eSIM not working after landing, the cause is almost always a setting rather than a fault, and the fix takes a minute once you know where to look. Work through the checks below in order; most people are online again before the end of the second section.

The menu names are those of a recent iPhone in English (Mobile Service on newer iOS versions, Mobile Data or Cellular on others) and of a Google Pixel; Samsung and other Android phones use similar words in slightly different places.

First: is the eSIM installed and switched on?

  • iPhone: go to Settings › Mobile Service. The eSIM should be listed as a line. Tap it and make sure Turn On This Line is on.
  • Pixel: Settings › Network & internet › SIMs, tap the eSIM and check that Use SIM is on.
  • Samsung: Settings › Connections › SIM manager, and make sure the eSIM’s switch is on.

If the eSIM isn’t there at all, it hasn’t been installed. Installing needs an internet connection, so find Wi-Fi and follow the steps for iPhone or Android. Keep an eye on the install deadline shown in the app.

eSIM not working at all: no signal or “No Service”

1. Are you where the plan works?

A plan only connects in the countries it covers. If you’re on a regional plan, check your country in the plan’s country list in the app. If you’re in transit, or still at home with a plan for somewhere else, no signal is normal.

2. Turn on data roaming, for the eSIM line only

A travel eSIM connects to local networks as a visitor, so your phone treats it as roaming. If data roaming is off for that line, it won’t use data.

  • iPhone: Settings › Mobile Service › tap the eSIM line › Mobile Data Options › Data Roaming on.
  • Pixel: Settings › Network & internet › SIMs › tap the eSIM › Roaming on.
  • Samsung: Settings › Connections › Mobile networks › Data roaming on. On a phone with two SIMs, check that it applies to the eSIM.

Leave data roaming off on your home line, so it can’t pick up roaming charges. The app’s “When you land” steps walk you through the same three switches.

3. Reconnect: airplane mode, then restart

Apple suggests turning on airplane mode for at least 15 seconds and off again, so the phone searches for networks afresh. If that doesn’t help, restart the phone. While you’re at it, check that the date and time are set automatically (on iPhone, Settings › General › Date & Time), which Apple lists as a fix for roaming problems after arrival.

4. Pick a network by hand

Sometimes a phone keeps trying a network the plan can’t use. Your eSIM’s page in the app lists the networks it works with, under Network settings.

  • iPhone: Settings › Mobile Service › the eSIM line › Network Selection: turn off Automatic, wait for the list, and pick one of the networks from the app.
  • Android: in the eSIM’s mobile network settings, turn off choosing the network automatically (on a Pixel, under SIMs › Network) and pick one of those networks.

Once you’re connected, you can usually switch back to automatic.

5. Try another network type

If a 5G setting is on and the signal keeps dropping, switch the line to 4G/LTE for a moment: on a Pixel under SIMs › Preferred network type, on an iPhone in the eSIM line’s Voice & Data setting.

Bars but no internet

If you have signal but nothing loads, the phone is connected to a network but isn’t using the eSIM’s data correctly.

  • Is the eSIM the line for mobile data? iPhone: Settings › Mobile Service › Mobile Data, choose the eSIM line. Pixel: SIMs › Mobile data. Samsung: SIM manager › Mobile data. Only one line can carry mobile data at a time.
  • Is mobile data switched on at all? It’s easy to leave it off after a flight.
  • Check the APN. Most eSIMs set it themselves. If the app shows an APN for your eSIM, check that the line uses it: on iPhone under the eSIM line’s Mobile Data Network, on Android under Access Point Names. Apple warns that a wrong APN can cut your data, and the Reset Settings button there restores the default. Don’t change an APN the app doesn’t mention.
  • Is there data left? Open the eSIM in the app: the usage counter shows what’s left and whether the plan has ended. If it’s used up, top up where the plan allows it.
  • Are you on a call? During a call on your home line, data can pause or move to the calling line on both iPhone and Android. Try again after the call.
  • VPN or content blocker? Switch it off for a moment to rule it out.

Slow rather than broken

Indoors, underground and in remote areas, any network slows down. Step outside or near a window before changing settings. Check the plan’s details in the app as well: they say what happens after the data, and the network generation the plan reaches. If speed drops sharply at the same time every evening in a busy place, that’s usually network congestion rather than your phone.

Last resorts

  • Update: install the latest iOS or Android version. On iPhone, Settings › General › About also offers a carrier settings update when one is available, over Wi-Fi.
  • Reset network settings: on a Pixel, Settings › System › Reset options › Reset mobile network settings. Some phones also offer to erase downloaded SIMs during a reset: don’t tick that. Resetting also forgets saved Wi-Fi passwords.
  • Don’t delete the eSIM to start over. On many phones a deleted eSIM can’t simply be installed again. Switching the line off is enough to get it out of the way.
  • Phone registration: a few countries require foreign phones to be registered after a while; Apple mentions it as something to ask about. Türkiye is the best-known case for local SIMs; see our Turkey guide.

When to contact us, and what to send

If you’ve been through the steps and it still doesn’t work, tap “Mail us” in the app. You’ll get the fastest answer if you include:

  • which eSIM it’s about (written from the order’s page in the app, the e-mail’s subject already carries the order number),
  • the country and city you’re in, and when you arrived,
  • your phone model and iOS or Android version,
  • what the top of the screen shows: no bars, “No Service”, “SOS”, bars with 4G or 5G,
  • a screenshot of the eSIM line’s settings, and which of the steps above you’ve tried.

“Mail us” opens your phone’s mail app, so you need some connection to send it: hotel or café Wi-Fi will do, and our reply arrives by e-mail. To avoid this before your next trip, install the eSIM at home a few days ahead, as described in how to choose a travel eSIM, and keep this page bookmarked.

Frequently asked

Why does my eSIM say No Service after landing?

Usually because the eSIM line is switched off, data roaming is off for that line, or the phone is stuck on a network the plan can’t use. Turn the line and its data roaming on, toggle airplane mode, and if needed pick one of the networks listed on your eSIM’s page in the app.

Do I need data roaming on for a travel eSIM?

Yes, for the eSIM line. A travel eSIM connects to local networks as a visitor, so the phone treats it as roaming. Keep data roaming off on your home line to avoid charges from your own operator.

My eSIM has signal but no internet. What should I check?

Check that the eSIM is the line chosen for mobile data, that mobile data is on, that the APN matches the one in the app if the app shows one, and that the plan still has data left. A VPN can also block the connection.

Should I delete and reinstall my eSIM?

No. On many phones a deleted eSIM can’t simply be installed again. Switch the line off and on instead, and contact us through “Mail us” in the app if it still doesn’t work.

How do I contact support if my eSIM isn’t working?

Tap “Mail us” in the app. Say where you are, which phone and software version you use, what the status bar shows and which steps you’ve tried; a screenshot of the line’s settings helps. We reply by e-mail.