How to install an eSIM on iPhone, step by step

Putting an eSIM on your iPhone takes a few minutes and needs no SIM tool, no shop and no paperwork. This guide shows how to install a travel eSIM on iPhone, from the button in the Visomu app to the questions your iPhone asks afterwards, and what to switch on when you land.
The short version: install it at home on Wi-Fi, keep your own number for calls and texts, and switch mobile data to the eSIM once you arrive.
Before you start
- A supported iPhone. Any iPhone XS, XS Max, XR or later can use eSIM. Most models sold in mainland China have two physical SIM slots instead; only a few recent ones there have eSIM. Not sure? See how to check whether your phone supports eSIM.
- No carrier lock. Go to Settings > General > About. Next to Network Provider Lock (Carrier Lock in some regions) it should say “No SIM restrictions”. If it doesn’t, ask your operator to unlock the phone well before your trip.
- Wi-Fi. Your iPhone downloads the eSIM profile over the internet, so connect to a reliable Wi-Fi network first.
- Up-to-date software. Install any waiting iOS update. Recent versions make installing an eSIM simpler.
- Time before the deadline. Every eSIM has an install deadline. The app shows a countdown and sends reminders, but there’s no reason to wait until the last day.
Installing at home starts nothing. A plan’s validity begins when the eSIM first connects to a network in the country it was bought for, so you can install a few days ahead without losing any days.
How to install an eSIM on iPhone from the Visomu app
The easiest way is to install straight from the app, on the iPhone you’ll travel with.
- Open the Visomu app, go to your eSIM and tap Install on this iPhone.
- Your iPhone opens its own eSIM setup. Read the screen and tap Continue. If iOS asks whether to allow the new eSIM, tap Allow.
- Wait while the profile downloads. Stay on Wi-Fi; it usually takes less than a minute.
- Answer the setup questions about your two lines (see below).
- Go back to the app and confirm that it’s installed. The app also shows when the network reports the eSIM as installed.
That’s it. Your own SIM stays exactly where it is and keeps your number working.
Other ways: a QR code or entering the details
Scan the QR code
If the app is open on another device, such as a tablet or a second phone, it can show a QR code instead. You can’t scan a QR code shown on the screen of the iPhone you’re scanning with, so the code has to be on the other device.
- On the iPhone you travel with, open the Camera app and point it at the QR code.
- Tap the Mobile Plan Detected notification that appears.
- Tap Continue, then Add Mobile Plan, and follow the screens.
On iOS 17.4 or later there’s one more option: if a QR code for an eSIM appears in an e-mail or on a web page on the iPhone itself, you can tap and hold it and choose Add eSIM.
Enter the details by hand
- In the app, choose to enter it by hand. The app shows two values: the SM-DP+ address and the activation code. Copy the code.
- On your iPhone, go to Settings > Mobile Service. On older iOS versions this is called Mobile Data, and Cellular in the US.
- Tap Add eSIM or Add Mobile Plan, then Enter Details Manually at the bottom of the screen.
- Enter the SM-DP+ address and the activation code, then continue.
The questions your iPhone asks
Once the eSIM is added, your iPhone asks how to use your two lines. At home, before your trip, answer like this:
- Labels. Give the eSIM a clear name. The app suggests one, such as “Visomu Japan”. Your own line can simply be “Home”.
- Default Line. Choose your own number, so calls and texts to people who aren’t in your contacts go out from your usual number.
- iMessage & FaceTime. Choose your own number, so people reach you exactly as before.
- Mobile Data. Keep your home line for now and switch to the eSIM when you land. You can also pick the eSIM straight away; it won’t start counting at home unless the plan covers home too.
- Allow Mobile Data Switching. Leave this off while you’re abroad. When it’s on, your iPhone can use your home line’s data when its coverage looks better, which can mean roaming charges.
You can change all of these later under Settings > Mobile Service. Tap a line there to rename it with Mobile Plan Label. If you rely on WhatsApp or bank texts, our guide to keeping WhatsApp and your number with an eSIM goes into the settings in more detail.
If the plan also covers where you are now
Some plans also work in the country where you install them, for example a Europe plan installed at home in Europe. The app tells you when that’s the case. Such a plan may start counting the moment it connects, so set it up, then switch the eSIM line off again until you travel: go to Settings > Mobile Service, tap the eSIM line and turn the line off.
When you land
- Go to Settings > Mobile Service and make sure the eSIM line is switched on.
- Tap the eSIM line, then Mobile Data Options, and turn on Data Roaming for this line only. The app asks you to, because the eSIM uses local networks abroad.
- Under Mobile Data, choose the eSIM line.
- Tap your home line, open its Mobile Data Options and check that Data Roaming is off, so it can’t use data abroad by accident.
- Give your iPhone a minute to find a network, then open a web page or the Visomu app to check.
No data? Work through these checks
- Check that the eSIM line is on, selected for Mobile Data, and has Data Roaming turned on.
- Turn Aeroplane Mode on and off again, or restart your iPhone.
- Pick a network by hand: Settings > Mobile Service, tap the eSIM line, then Network Selection. Turn off Automatic and choose one of the networks listed on your eSIM’s page in the app.
- Check the APN. If the app shows one, paste it under Settings > Mobile Service, the eSIM line, Mobile Data Network, in the APN field under Mobile Data.
- Still nothing? Use “Mail us” in the app, say where you are and what you see, and we’ll reply by e-mail.
Keep the eSIM until your plan ends
Don’t delete the eSIM while the plan is still running, not even to try to reset it. On many phones a deleted eSIM can’t simply be put back. If you run low on data, top up in the app where the plan allows it: the extra data is added to the same eSIM, with nothing new to install. The app tells you before you buy whether a plan can be topped up, and warns you when your data runs low or the plan ends soon.
Once the plan has finished, you can remove the eSIM in Settings > Mobile Service by tapping its line.
Your iPhone eSIM checklist
- Check that your iPhone supports eSIM and shows “No SIM restrictions”.
- Install the eSIM at home on Wi-Fi, before its install deadline.
- Label the lines and keep your own number as the default for calls, texts, iMessage and FaceTime.
- Leave Allow Mobile Data Switching off.
- On landing: eSIM line on, Data Roaming on for the eSIM, Mobile Data on the eSIM, Data Roaming off for your home line.
- Keep the eSIM installed until your plan ends.
Frequently asked
Can I install the eSIM on my iPhone before I travel?
Yes, and it’s the best moment: at home, on Wi-Fi, a day or two before you fly. Installing starts nothing. The plan begins when the eSIM first connects to a network in the country it was bought for. If the plan also covers where you are now, the app tells you; switch the line off after installing until you travel.
Do I need to remove my physical SIM?
No. The eSIM is added as a second line. Your own SIM stays in the iPhone, so your number keeps working for calls and texts while mobile data uses the eSIM.
Can I scan the QR code on the same iPhone?
Not with the camera, because the code would have to be on the screen you’re scanning with. Use the Install on this iPhone button in the app instead, show the QR code on another device, or enter the SM-DP+ address and activation code by hand.
Which line should I use for iMessage and FaceTime?
Your own number. The travel eSIM is data only and has no phone number, so keeping iMessage, FaceTime and your default line on your own number means people reach you exactly as before.
What if I deleted the eSIM by accident?
On many phones a deleted eSIM can’t simply be put back, so keep it installed until your plan ends. If it has already happened, use Mail us in the app and tell us which eSIM it was.